10S6P NCR18650GA UAV battery pack


Technical specs and performances:

Cell count: 60 (same rank cells)
Cell type: Panasonic NCR18650GA – Made in Japan
Electrochemistry: Lithium-ion NCA (LiNiCoAlO2)
DC IR: less than 38mΩ
Series-Parallel-Connected Cells: 10S6P
Current capacity: 21Ah (21000 mAh)
Voltage (nominal) 36V/37V
Energy capacity: 756Wh
Power: 2160W
Maximum continuous discharge current: 60A
Maximum pulse discharge current (10sec): > 80A
Maximum allowable charge voltage: 42V
The discharge end voltage should be more than 27V (recommended 31V for long lifespan)
Charging current (CC): 10A (for maximum energy storage)
Weight: +/- 3000g (including wiring harnesses, connectors & covering)
Physical dimensions (distance between cell pack edges, excluding harnesses): 290 x 75 x 72 mm / 245 x 90 x 72 mm / 210 x 102 x 72 mm

Wiring harnesses and connectors:
Discharge wire type: Multi-strand 12AWG flexible silicone insulated copper
Gold plated discharge connector (customizable): XT90s / EC5/ XT150 / AS150
Discharge wire length (pack to connector end) +/- 100mm
Balance Plug: JST-XH 11-pin
Balance wire length (pack to connector end): +/- 70mm

Thermal management:
Innovative Passive Built-in Battery Cooling System.
Shielded and Cooled Discharge Cable.

LM35 Temperature Sensor, with a standard 3-pin connector.
10k NTC thermistor/sensor TDK Electronics.
6W Integrated Battery Heating System (IBHS), for sub-zero applications. Requires an external 6V power source from PDB/BEC of the aircraft.

The upper part of the cell is over-insulated with a ring-shaped dielectric material.
The entire cell block is surrounded by a multi-layers shield with mechanical strength and dielectric insulated, outside-reinforced with an aluminized film used in the spacecraft industry. All covering materials provide a high sealing, improve thermal performance and contribute to the robustness of the battery pack.
The battery pack is externally wrapped in a hard (Black & Blue) PVC film.

Warranty: 2 year

The price is displayed in the inventory list